CJYWH - SANFORD RUBBER CEMENT

  • MSDS: CJYWH
  • Manufacturer: SANFORD CORP
  • Product Name: SANFORD RUBBER CEMENT
  • National Stock Number: 7510-00-T64-4611
Product Identification

Product ID:SANFORD RUBBER CEMENT
MSDS Date:04/24/1992
FSC:7510
NIIN:00-T64-4611
Status Code:A
MSDS Number: CJYWH

Responsible Party
SANFORD CORP
2740 WASHINGTON BLVD
BELLWOOD, IL 60104
US

Emergency Phone: 800-228-5635

Info Phone: 800-228-5635

Preparer: NOT PROVIDED

Cage: 86874

Contractor
SANFORD CORPORATION
BELLWOOD, IL 60104 US

Telephone: 1-800-323-0749

Cage: 86874

Ingredients

HEPTANE

CAS: 142-82-5

RTECS: MI7700000

OSHA PEL 2000 MG/M3;500 PPM

ACGIH TLV: 1640 MG/M3;400 PPM


ETHYL ALCOHOL

CAS: 64-17-5

RTECS: KQ6300000

OSHA PEL 1900 MG/M3;1000 PPM

ACGIH TLV: 1880 MG/M3;1000 PPM

Hazards

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT TOXIC
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EYE/SKIN IRRITATION
Medical Cond Aggravated by Exposure:NOT PROVIDED

First Aid

First Aid:EYES: FLUSH WITH WATER. SKIN: WASH WITH SOAP AND WATER.
INGESTION: CALL A PHYSICIAN.

Fire Fighting

Flash Point Method:TCC
Flash Point:=-3.7C, 25.F
Lower Limits:1.2
Upper Limits:7.5
Extinguishing Media:NOT PROVIDED ON MSDS. HMIS FOCAL POINT RECOMMENDS
FOAM, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:NONE SPECIFIED ON MSDS. RECOMMEND FOLLOW
GUIDELINES FOR CLASS 1/GROUP D FLAMMABLE LIQUIDS
Unusual Fire/Explosion Hazard:HEAVIER THAN AIR VAPORS

Accidental Release

Spill Release Procedures:WIPE UP WITH AN ABSORBENT MATERIAL
Neutralizing Agent:NOT PROVIDED

Handling

Handling and Storage Precautions:KEEP CAP ON CONTAINER WHEN NOT IN USE.
USE ONLY IN WELL VENTILATED AREA. AVOID SKIN CONTACT WITH LIQUID.
Other Precautions:NOT PROVIDED

Exposure Controls

Respiratory Protection:NONE UNDER NORMAL WORKING CONDITIONS
Ventilation:AS NEEDED TO KEEP BELOW TLV FOR INGREDIENTS
Protective Gloves:NONE SPECIFIED. RECOMMEND CHEMICALLY RESISTANT
NEOPRENE AS NEEDED
Eye Protection:NONE SPECIFIED. USE OSHA APPROVED FOR SPLASH PROTECTION.
Other Protective Equipment:NOT PROVIDED
Work Hygienic Practices:CLEAN, SAFE WORK ENVIRONMENT
Supplemental Safety and Health
NOT RELEVANT

Chemical Properties

HCC:F2
Boiling Pt:=93.3C, 200.F
Vapor Pres:76 MM HG @ 68 F
Vapor Density:> AIR
Spec Gravity:<1.0
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER VISCOUS LIQUID, SOLVENT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:AVOID SPARKS AND FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
HYDROCARBONS, AND ACRID PRODUCTS OF COMBUSTION

Disposal

Waste Disposal Methods:DISCARD AS A SOLID WASTE

Toxicology

Toxicological Information:NOT PROVIDED

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecology

Ecological:NOT PROVIDED

Transport

Transport Information:SEE TRANSPORTATION SECTION

Regulatory

SARA Title III Information:NOT PROVIDED
Federal Regulatory Information:NOT PROVIDED
State Regulatory Information:NOT PROVIDED